An estimated 356,000 in-home fires caused more than $7 billion in U.S. residential property damage in 2009, according to data from the United States Fire Administration.

The fires caused more than 12,000 injuries, and killed more than 2,500 people in Arlington, Lexington, Winchester and nationwide.

Unfortunately, many of affected homes did have smoke detectors — they just weren’t working properly. This is why it’s critically important to test your home’s smoke detectors at least once annually.

When you test a smoke detector, you’re making sure that the alarm will trigger in the event of a real-life fire. A proper test will confirm that the batteries have useful life, and that the device’s smoke detection components are operating as expected.

To test your smoke detector, here’s what to do :

1. Make a checklist of your home’s smoke detectors
2. Go to the first smoke detector
3. Ask a helper to go to the farthest point from the detector within your home
4. Press the smoke detector’s testing button up to 10 seconds to activate the alarm
5. Confirm with your helper that the alarm could be heard from his/her location
6. Note on the checklist whether the smoke detector worked, or needs replacement

You can also take your test a step further.

Just because the smoke detector’s alarm can be heard from the farthest point in your house doesn’t mean that the alarm will sound in the event of a real fire. Therefore, you may want to buy a “smoke test”.

Smoke tests are aerosol cans that simulate a bona fide in-home fire. You can buy them for less than $15 at your local hardware store, or at Amazon.com. If your smoke detector fails to sound its alarm in the presence of a “real fire”, make sure you replace it right away.

November is here with many parts of the country are already feeling the chill. This weekend, a nor’easter dropped up to 20 inches of snow in cities along the eastern seaboard  – a reminder that winter is coming.

No matter where you live, though, the seasonal change in temperature throughout Arlington, ma serves as an excellent reminder to reset the blades on your home’s ceiling fans.

Ceiling fans don’t warm or cool air, specifically. Instead, they circulate air which can have the effect of making a room feel warmer in the winter months, and cooler in the summer months.

When it’s cold outside, ceiling fans push warm air down from the ceiling, balancing the heat within a room. This can make a room feel 4-6 degrees warmer. Then, during warmer months, ceiling fans push a room’s cold air back into circulation, which creates a windchill effect, of sorts.

This, too, can change a room’s temperate 4-6 degrees.

The secret to a ceiling fan is in the rotation direction of its blades.

• When fan blades rotate clockwise, the fan makes a room feel warmed
• When fan blades rotate counter-clockwise, the fan make a room feel cooler.

This Weather Channel video explains how it works.

If your home is without ceiling fans, consider installing one (or more). Ceiling fans are economical and “green”, using the equivalent energy of a 100-watt light bulb, while lowering your home’s energy costs.

Plus, they’re relatively simple to install.

Tutorial videos are available online for the do-it-yourselfers, or just call a qualified electrician for assistance.

Installing a ceiling fan is a 1-hour project.

When we move into a home, we make changes. Appliances get replaced, rooms get painted, and floors get refinished or recarpeted. It part of how we make a home “ours”.

One item we tend to skip, though, is the changing of the doorbell. In most Arlington homes, the existing doorbell is “good enough”. 

Well, if you’ve ever had a mind to change your home’s hard-wired doorbell system, the good news is that changing your doorbell is a simple, do-it-yourself project. Whether you want chimes, songs, or the traditional ding-dong, all you need is a screwdriver, some tape, and the new doorbell system.

This 2-minute video from Lowe’s maps it out :

1. Cut the power to your doorbell from your circuit breaker
2. Unscrew the doorbell face plate
3. Replace the face plate with your new doorbell
4. Locate your in-home receiver and remove the chime system
5. Replace the chime system with your new system

The video also includes helpful tips such as how to use tape to prevent “losing” wires in your walls, and how to label your wires for faster re-wiring.

Changing a doorbell is a quick, 1-hour project. Use the video’s guidance to make you don’t miss a step.

How much energy is your home wasting on water?

According to the U.S. Department of Energy, water heating can account for 25% of a home’s energy use. This is a substantial percentage, representing thousands of dollars per year in energy costs.

The good news is there are multiple ways to increase your home’s energy-efficiency with respect to heated water.

The Department of Energy provides a list. 

1. Reduce hot water usage : Fix leaks, install low-flow fixtures, and use high-efficiency clothes washers and dishwashers.
2. Lower the hot water temperature : 120ºF is ideal. Each 10ºF drop in temperature saves up to 5% and slows corrosion.
3. Insulate your water heater : A simple blanket wrap costs $25 and will save you up to 9% in costs
4. Insulate your water pipes : Water will be delivered 4ºF hotter which means lower energy use.
5. Install a timer : If your heater is electric, turn it off during non-peak hours such as overnight
6. Use greywater heat recovery systems : 90% of water’s energy is typically lost down the drain.

Some of the above items are costly to implement, and others are inexpensive. Most can be handled without hiring a plumber, especially those items at the top of the list.

As a Arlington homeowner, take control. Apply these energy-saving, water-heating strategies and you’ll not only save money each month, but you’ll lengthen the useful life of your home’s appliances and plumbing.

If you’re in need a plumber referral, please ask.

Did you remember to handle the most basic safety precaution for your new home?

When people buy homes — in Lexington or wherever —  , there’s a tendency to think “Big Picture” on home improvements. Flooring, painting and furniture are common “just-moved-in” purchases, as are cable television and utilities packages.

The most important move-in purchase, though, may also be the least expensive — deadbolts for your doors.

Every home has at least one — and sometimes up to dozen — keyed points of entry. And until you change those locks, there’s no telling just how many people may have access to your home.

For example, your home’s prior owners may have shared house keys with any/all of the following people :

• Real estate agents
• Neighbors and friends
• Parents, brothers and sisters
• Home cleaning service
• Dog walkers and pet sitters

Those keys will still gain entry into your home until you change the locks. This is why your first act homeowner should be to replace all your home’s keyed entries with new locks and/or deadbolts.

Locks and deadbolts come in a variety of designs and finises, with varying price points. A basic single-cylinder, keyed deadbolt costs less than $15, and a powerful digital-entry, keyless system sells for $200-plus. There are a bevy of models at prices in between, too.

Regardless of which lock system you choose, don’t procrastinate on installation. Ideally, your locks should be changed on the same day of purchase, as close to closing’s completion as possible.

Hardware stores carry most deadbolt varieties and many can be installed with just a screwdriver. For complicated installations, talk to a locksmith.

It’s October and the fall season has officially started. For homeowners throughout Massachusetts and nationwide, the change of season is a well-timed, “preventative maintenance” reminder.

As temperatures cool, there are a handful of do-it-yourself projects you should undertake in order to keep your home in tip-top shape through the winter. This 4-minute piece from NBC’s The Today Show highlights just a few of them.

Calling it a “Fall Fix-Up Checklist”, The Today Show’s interview is fast-paced and wide-ranging. Some of the topics covered include :

• Pick up all fallen leaves to limit damage to grass and “critter” invasions
• Unclog gutters to protect windows and foundations
• Turn off outside water sources and remove water from pipes and hoses

The home-tip video also shares how to find air leaks in your home, and how to fix them. Reducing air leaks can lower your home’s heating and cooling bills by thousands of dollars annually.

Although the highlighted projects are DIYs, you may feel more comfortable hiring a professional. Know your “handyman limits”, and remain safe at all times.